Coloured magnetic tape 40 mm

magnetic strip for labelling and cutting, rolls of 1 m

Item number	MT-40
Unit of Sale	1 meter

Similar products
Examples of use
Data sheet

Price and rebate
	1 m	4,00 EUR/m
from	3 m	3,44 EUR/m
from	10 m	2,94 EUR/m
from	20 m	2,71 EUR/m
from	40 m	2,49 EUR/m
Ask for a rebate from 180 m
incl. VAT plus shipping

4,00 EUR

incl. VAT plus shipping

Please select your desired model.

Please select

Amount in metres

Description

This colourful magnetic tape is 40 mm wide and available in many different colours. It consists of strontium ferrite, the coloured front of the magnetic strip is laminated with PVC. The dark back of the tape is coated so it won’t stain and to protect it against abrasion. You can cut it to size with household scissors and label it with pencil, pen or whiteboard marker. The writing can be removed with alcohol, benzine or eraser, but some marks may remain. A waterproof felt tip marker is best suited for writing a permanent label on magnetic tape. You can find detailed information in our FAQ labelling. You can also print on magnetic tape using digital or screen-printing techniques. Please read our tips for printing on magnetic tapes.

Coloured magnetic tape is primarily intended for indoor applications. You could use it outdoors since it doesn’t rust, but over time it will become brittle and lose its colour due to sunlight exposure. So, if you decide on an outdoor application, expect to replace the coloured magnetic tape after a while. You can find additional information on our FAQ page about the characteristics of magnetic tapes.

The writable magnetic tape will be delivered in rolls of 1 metre each. If you order 3 metres in red, for instance, you will receive three rolls of 1 metre each.

Please note

Magnets should not be placed on magnetic tapes because they would demagnetise those tapes. Suitable surfaces for magnets are ferrous strips and metal strips. Other holding surfaces can be found under surfaces for magnets.

Technical data

Article ID	MT-40
Length	1 m
Width	40 mm
Thickness	1 mm
Magnetisation	Anisotropic
Strength	80 g/cm²
Design	Coloured
Shape	Other
Weight	150 g/m
PDF data sheet

Additional features and tips

The magnetic tapes are available in many different colours. They are anisotropically magnetised, which increases their adhesive force.

The flux detector small beautifully visualises the lamellar magnetisation. North and south poles alternate closely spaced. That leads to a higher adhesive force at direct contact with ferromagnetic surfaces.

Magnetic tapes are suitable for all sorts of labeling: By hand...

... with printed labels...

... or without writing, just as a colour-coded identification.

This magnetic tape is 40 mm wide, so it lends itself to making little signs for the whiteboard.

Fancy frame: Magnetic tapes can also add a stylistic note. On the top left the Coloured magnetic tape 20 mm was used, on the right the Coloured magnetic tape 10 mm and below the MT-40.

However, that works only with paper or thin cardboard, because magnetic tapes are not designed for this type of use; they need direct contact with a ferromagnetic surface.